
Variations of Harp Screens
atr-gBX5y | 24/10/2022 | 0 | BusinessHarp screens are made of straight or woven wire solutions used to screen for variations of moist, sticky materials and other tough or difficult-to-screen materials. Harp screens are offered in TYP- T triangular mesh wire and TYP-K square mesh wire.
What are harp screens with straight and woven wire?
The structure of the harp screens and materials are used in a diversified method that makes the groups of self-cleaning methods and screens. Due to the vibrations of the wires, it develops the self-cleaning effect of the screen, which results in an increased screening efficiency compared to other braided screens.
The harp wire screen webs are made of abrasion-resistant material, which ensures a much longer and healthier screen life than other wires. Making the wires from A1 and high quality affects the longer operation time of the harp screen.
The crucial factor in harp screens is that wires are either straight or crimped with some other wide-space cross supports, and this helps every other wire to encourage and build excitement because of the material to be screened due to the force of the screening machine used.
A Harp screen is a type of screen panel usually recommended for materials that are risky or tough to be screened and those who stick or blind conventional wire, especially those with shaped wedge wire containing moist range.
Variation in harp screens
a. Isevier harp screen
The isevier harp is made of crimped screen wires. It engages with a combination of crimping and arranged one after the another. Thus it forms square meshes. In these types of screens, it is essential to achieve stability for the screen, and the crimped wires are linked at a specific spacing by wires or PU bindings to attain the spacing.
- Another name- Serpa-Flex-Harps
- Material required- Stainless steel and spring steel
- Cross connection with ss or spring steel and PU
- Maximum temperature-80” C
- Width of the screen-2500 mm
b. Iseveno Harp screen
Iseveno harp screens are an alternate solution for crimped and straight wires. Their arrangements are set to be horizontal by the level across the screen. A triangular screen opening is attached to form these crimps of wire and square wire.
The wires are then placed at a specific spacing by cross-section binding made using plastic bindings. However, depending on the customer’s requirement per order, it can be adjusted and separated.
- Another name- Veno-Flex-Harps
- Material required- Stainless steel and spring steel
- Cross connection with ss or spring steel and PU
- Maximum temperature-80” C
- Width of the screen-2500 mm
c. N-harps
N-harps are made using crimped as well as smooth longitudinal wires. These wires tend to be fixed at a measurable distance through PU bindings or wire buildings by a long screen opening attached to them.
- Another name- Harpa-Flex-Harps
- Material required- Stainless steel and spring steel
- Cross connection with ss or spring steel and PU
- Maximum temperature-80” C
- Width of the screen-2500 mm
Wrapping up
Screening makes the finest and most challenging materials possible using a harp screen wire cluster used within it. They are mainly supplied with tensioning folds, and harp screens need the correct operation of the screen.
It also has the benefit of providing the highest performance under every circumstance. And we hope you have gone through the article considering variations of harp screens. If you have any questions or queries related to it, feel free to ask us.